LITHIUN-BASED HARDENING SEALER (LHS)
Brief Introduction:
Chemnano Lithiun-based Hardening
Sealer ( LHS ) is a water-based, surface-applied, but penetrating and internal
reactive inorganic sealer for the sealing and hardening of concrete surface, it
penetrates and reacts with lime and alkali, form insoluble calcium silicate
hydrate which solidifies and crystallizes and finally seals the pores, increases
the floors density, hardness, compressive strength, realizes the function of
dust-proofing, waterproofing, anti-permeability, anti-corrosion, anti-cracking
etc. Reccomended for: factory floors, garage floors, parking areas, warehouse
floors, school floors, port floors, airport floors, exhibition hall floors,
hospital floors, supermarket floors, etc, concrete
roads.
Characteristics:
Environment friendly, colorless,
odorless, non-toxic, non-flammable, release no VOC, easy to use.
Functions:
A. Lasting sealing, hardening, anti-permeating, waterproofing, dirt-proofing;
B. Anti-corrosion of acid, alkali and salt;
C. Improving Hardening floors compressive strength, friction coefficient, wear-resisting;
D. Anti-skidding, anti-tyre-marks;
E. Reducing cracks and stains.
F. Prolong the service life of finishing coating and the floor.
G. After polishing, an immediate marble like gloss will appear and it will last forever.
H. The treated floor is easy to clean and maintain, and the color of the treated floor is not changed.
I. Easy to use, efficiently reduces the labor cost and maintainance cost.
Benefits:
1. Environment friendly;
2. Easy to
use, efficiently reduce the labor cost;
3. Permanent function of sealing,
hardening and anti-permeability etc after one-time application;
4. Giving the
Hardening structure all-sided protection so that largely decrease the repair
and maintenance cost.
Working Principle:
Through the pores, HS penetrates into
the Hardening floors, reacts with the free calcium(Ca+), free potassium(K+)etc,
then continuously generates calcium silicate hydrate, which finally solidifies
and becomes an integral part of the Hardening structure. In short, through
filling in the pores and increasing the density of the floors it can play a role
of hardening/sealing/dust-proofing/Water
proofing/anti-permeability/anti-corrosion.
Surface Treatment Before Using HS:
A. Freshly
Finished Hardening Floor: No treatment need.
B. Old Hardening Floor: To
grind the surface even, repair the cracks, then sweep or scrab the surface clean
to ensure th e HS can efficiently penetrate the surface.
Method of Using:
1. Shake well before using.
2.
Apply with low-pressure sprayer, brush or roller to spray/brush/roll directly
on the clean Hardening surface, application temperature at 5-35鈩�, and relative
humidity 10-90% is the best.
3. The areas that becomes dry too quickly, need
to proceeds the second spraying in time.
Coverage:
Approximately
3-5m2/kg(150-200square feet/gallon), according to different quality
and tightness of the Hardening floor, the coverage is different.
Applicable Places:
Hardening floor, cement-mortar
floor, color aggregate floor, emery floor, terrazzo floor, and self-leveling
floor, whatever below and above ground, indoors and outdoors, new or old.
Limitations:
A. Not suitable for lightweight blocks,
porous masonry etc similar products.
B. Floors previously treated with
curing or sealing agents, unless these coatings have completely worn off or have
been removed by chemical or mechanical means.
Clean Up: By soap and water.
Packing: 20kg/pail, 220kg/barrel(=5gallon/pail,
55gallon/barrel)
Storage Life: Unlimited shelf life in the original and
sealed condition.
Lastest News
How To Remove Old Acrylic Sealer
2021-11-07
Cement-based permeable crystallization type waterproof coating of winter constru
2020-07-01
In the construction engineering of waterproof several misconceptions
2020-05-21
The application of Cretesealer DPS on the roof, toilet.
2019-12-25
Yong condensate scientific application of DPS in the basement, and garage
2019-12-11
Yong condensate DPS technology application in the tunnel engineering
2019-11-01
Read More |
Search
Keywrod |
Agent
China:
Shijiazhuang Rongsheng Co.,ltd
Add: Shijiazhuang city, hebei province,China
Tel: (86)4000-8778-263
Email:info@chemnano.cn
Canada:
Cretes Construction Group,Inc
Add:15927 105 Ave NW Edmonton, AB T5P 0T8, Alberta, Canada
Tel: (416) 483-8983 Cleveland
Email:Canada@chemnano.com
Russia:
Erimak Strone waterproofing ,Ltd
Add:ulitsa Shchorsa, 103 Krasnoyarskiy kray,krasnodar ayers,Russia
Tel:+ 7- 85645-6379 Andelin
Email:Russia@chemnano.com
Australia:
Peldiigyu waterproofing ,Inc
George Cres Ciccone NT 0870 northern territory, springs, Australia
Tel: +6-5684-6853 Jack Fulos
Email:Australia@chemnano.com